Hilti SFH144A 14V Cordless Impact Drill
DeWalt DC925 18v Cordless Impact Drill
The DeWalt DC925 18v cordless drill is variable speed with 3 gears, 21 torque settings and hammer action. Fitted with a keyless chuck, intended for use on wood, metal, masonry, and plastic. Supplied in a plastic case with 3 x batteries and 30 minute charger.
The DeWalt DC925 18v cordless drill is variable speed with 3 gears, 21 torque settings and hammer action. Fitted with a keyless chuck, intended for use on wood, metal, masonry, and plastic. Supplied in a plastic case with 3 x batteries and 30 minute charger.
Hilti SFH22 22V Cordless Impact Drill
Magbroach MD28 Magbase Drill
The Magbroach MD28 is a small capable magnetic base drill with a Broach cutting shank suitable for precision Broach cutting. The shank can be removed from the drill and fitted with a ½" chuck as required. Its compactness makes the drill ideal for restricted access.
The Magbroach MD28 is a small capable magnetic base drill with a Broach cutting shank suitable for precision Broach cutting. The shank can be removed from the drill and fitted with a ½" chuck as required. Its compactness makes the drill ideal for restricted access.
Magbroach MD108 Magbase Drill
The Magbroach MD108 is a powerful variable speed magnetic base drill with a Morse taper 3 output shaft suitable for precision drilling. This machine is fitted with a clutch built in to the motor that will help prevent jammed drill bits shattering during operation. MD108 works with MT3 drill bits being fitted directly into the output shaft held in by the taper. It can also be fitted with a 5/8" chuck adaptor or Broach cutting adaptor held in the same way as the MT3 drill bit.
The Magbroach MD108 is a powerful variable speed magnetic base drill with a Morse taper 3 output shaft suitable for precision drilling. This machine is fitted with a clutch built in to the motor that will help prevent jammed drill bits shattering during operation. MD108 works with MT3 drill bits being fitted directly into the output shaft held in by the taper. It can also be fitted with a 5/8" chuck adaptor or Broach cutting adaptor held in the same way as the MT3 drill bit.
Makita DP4011 Pistol Drill
The Makita DP4011 is a variable speed pistol drill fitted with a keyless chuck, intended for drilling in wood, metal and plastic.
The Makita DP4011 is a variable speed pistol drill fitted with a keyless chuck, intended for drilling in wood, metal and plastic.
Angle Drill
The industrial class drill whose head can be rotated to any angle allowing for use in the most tight of situations. With variable speed at up to 900RPM and a heavy duty keyed chuck.
The industrial class drill whose head can be rotated to any angle allowing for use in the most tight of situations. With variable speed at up to 900RPM and a heavy duty keyed chuck.
Medium Duty Drill
The industrial class drill with variable speed at up to 900RPM and a heavy duty keyed chuck.
The industrial class drill with variable speed at up to 900RPM and a heavy duty keyed chuck.
MT2 Drill
This Rotary Drill with cross & back handle and two speed settings, one of the most powerful rotary drills in the range, the big powerful motor gives a 23mm cutting diameter capacity through steel, this ideal for core drilling during steel fabrication, fitted with a two speed gearbox, auxiliary handle and safety clutch.
This Rotary Drill with cross & back handle and two speed settings, one of the most powerful rotary drills in the range, the big powerful motor gives a 23mm cutting diameter capacity through steel, this ideal for core drilling during steel fabrication, fitted with a two speed gearbox, auxiliary handle and safety clutch.
Low Headroom Mag Drill
Rotabroach Drill
The MD108 is a 4 speed, No.3 MT heavy duty drilling/milling machine with 32mm dia. drilling capacity and 100mm dia. broaching capacity using Magbroach cutters.
The MD108 is a 4 speed, No.3 MT heavy duty drilling/milling machine with 32mm dia. drilling capacity and 100mm dia. broaching capacity using Magbroach cutters.
