Receiver Air 40L Our 40 litre air receiver as our standard option, however other sizes are available upon request. This unit can be used to increase the volume of air available in an air line or use as a 6 way air manifold to allow several lines to be taken of one supply.
Chisel Gun GNV-28 GNV-28 Chisel Gun is extremely powerful but the advanced patented anti-vibration system has reduced vibrations to a low level. No other tool is close to its combination of high power and low vibration level. The low vibration level and the low weight minimize long term health ricks and lower fatigue. With its low noise level and minable vibration it is possible to use the tool for longer periods of time.
Needle Gun Air IPT GNV28 The GNV-28 is a compact light weight needle de-scaler which is extremely powerful. This tool also has a patented anti-vibration system which has reduced vibration levels significantly compared to other models. The lower vibration and light weight design minimise long term health risks and lowers fatigue. The needle de-scaler is designed for rust and paint removal, weld dressing, scaling, deslagging and cleaning concrete.
Cable Jacks Set A range of screw jacks/cable drum jacks, easy to handle and simple to operate. Large base plate designed to give stability, even on soft ground.
Cable Drum Jacks Lightweight hydraulic cable drum jack. Versatile and easily adjustable for drum size. Hydraulic cable drum jack fitted with wheels to allow one man to move them around the cable yard. Cable drum jack supplied complete with drum spindle and locking collars.
Bowser Diesel 950L This unit is designed for storage and transportation of diesel fuel. The bowser is fully bunded and comes complete with hand pump for easy refuelling.
1/2" Air Drill UT 5880 The UT5880 is a slow speed ½” air drill with a cushion grip for operator comfort. This machine is intended for drilling in all types of materials.
Air Angle Drill UT HP8807B The UT8807B is a high speed reversible 1/2” air angle drill. This machine is intended for drilling in all types of materials, where access may be restricted.
MT2 Air Drill This is a heavy duty reversible Air Drill for use drilling large diameter holes with a Morse taper drill bit in wood, metal and plastic also for paint mixing with a paddle. With a twist grip trigger for comfort and safety.
MT3 Air Drill This is a heavy duty reversible Air Drill for use drilling large diameter holes with a Morse taper drill bit in wood, metal and plastic also for paint mixing with a paddle. With a twist grip trigger for comfort and safety.
Air Rotabroach (ATEX) The Rotabroach RD130C Micro Air is a magnetic base broach cutter suitable for use in potentially hazardous areas. This machine is a compact unit with a powerful manually operated magnet for precision broach cutting. The unit is supplied standard with a guard on the front to protect the operator from swarf and other flying material.
DeWalt DC925 18v Cordless Impact Drill The DeWalt DC925 18v cordless drill is variable speed with 3 gears, 21 torque settings and hammer action. Fitted with a keyless chuck, intended for use on wood, metal, masonry, and plastic. Supplied in a plastic case with 3 x batteries and 30 minute charger.
Magbroach MD28 Magbase Drill The Magbroach MD28 is a small capable magnetic base drill with a Broach cutting shank suitable for precision Broach cutting. The shank can be removed from the drill and fitted with a ½" chuck as required. Its compactness makes the drill ideal for restricted access.
Magbroach MD108 Magbase Drill The Magbroach MD108 is a powerful variable speed magnetic base drill with a Morse taper 3 output shaft suitable for precision drilling. This machine is fitted with a clutch built in to the motor that will help prevent jammed drill bits shattering during operation. MD108 works with MT3 drill bits being fitted directly into the output shaft held in by the taper. It can also be fitted with a 5/8" chuck adaptor or Broach cutting adaptor held in the same way as the MT3 drill bit.
Makita DP4011 Pistol Drill The Makita DP4011 is a variable speed pistol drill fitted with a keyless chuck, intended for drilling in wood, metal and plastic.
Angle Drill The industrial class drill whose head can be rotated to any angle allowing for use in the most tight of situations. With variable speed at up to 900RPM and a heavy duty keyed chuck.
MT2 Drill This Rotary Drill with cross & back handle and two speed settings, one of the most powerful rotary drills in the range, the big powerful motor gives a 23mm cutting diameter capacity through steel, this ideal for core drilling during steel fabrication, fitted with a two speed gearbox, auxiliary handle and safety clutch.
Rotabroach Drill The MD108 is a 4 speed, No.3 MT heavy duty drilling/milling machine with 32mm dia. drilling capacity and 100mm dia. broaching capacity using Magbroach cutters.
7" Air Angle Grinder The UT8754F grinder is a compact air angle grinder. This machine in intended for grinding all kinds of steel and dressing of welds.
Air Die Grinder The UT 5720A air die grinder is fitted standard with a cushion grip for operator comfort. The machine is intended for grinding non ferrous metals or de-burring castings with flap wheels or tungsten carbide burr's.
Makita Die Grinder The Makita GDO800C die grinder is a light weight heavy duty variable speed die grinder. The machine is intended for grinding non ferrous metals or de-burring castings with flap wheels or tungsten carbide burr's.
Industrial Heater Industrial and commercial use infrared heater. This low sounding heater has possible connection to an optional room thermostat. Strong and long lasting construction. Easy maintenance with European standard components.
Hydraulic Toe Jacks These hydraulic toe jacks are ideal when working in very confined spaces and they also have an extremely low toe height. Typical uses include lifting and positioning of heavy machinery, fabricated steel structures and general engineering applications.
Hydraulic Pipe Bender Manual hydraulic benders for precision cold bending of pipes up to 2". Versatile, portable and ideal for onsite bending and industrial applications in general. Supplied with tip up wing for easy installation.
Hydraulic Cylinder Jacks c/w Pump, Gauge & Hose Enermech provides a wide range of cylinders and lifting systems. We have a solution for practically any application – lifting, pushing, pulling, bending or holding – in most industrial and commercial work environments.
Hydraulic Crimping Tool This tool is a self-contained hydraulic cable crimping tool suitable for non-insulated terminals from 10 to 400mm². This model is fitted with an automatic pressure release valve and is supplied complete with standard die sets and a carrying case. Models with 180° rotating head are designed for easy access into confined spaces.
1/2" Air Impact Wrench - CP6500RSR The UT8126 is a adjustable torque 1/2" air impact wrench with a composite plastic motor housing which helps keep sound levels down and prevents the trigger handle getting as cold as aluminium cast models. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
3/4" Air Impact Wrench - CP8272 The UT8326 is a adjustable torque 3/4" air impact wrench with a composite plastic motor housing which helps keep sound levels down and prevents the trigger handle getting as cold as aluminium cast models. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
1" Air Impact Wrench - CP0611P The UT8425R is an adjustable torque 1" air impact wrench with a powerful air motor & side handle for operator comfort. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
Carbon Steel and Stainless Steel Pipe Fitting Kits These fittings can be installed without hotwork. This allows fittings to be installed in areas where solvents and other chemicals may be present. These fittings offer "no heat effected zone" where a weld is susceptible to accelerated corrosion. In addition it will eliminate weld slag, incomplete fusion, weld suckback, the need for passivation and x-ray.
Megger Meter The MIT310 Insulation and Continuity Tester has applications in all aspects of domestic, commercial and industrial electrical contracting, building maintenance, testing, inspection and servicing. Combining both Insulation testing and continuity testing, each instrument caters for all aspects of fixed wiring installations.
Dorvic Machine Skates Enermech supply boxed sets of steel roller caterpillar action Enermech supply boxed sets of steel roller caterpillar action skates. Sets carry loads up to 20 tonnes or 50 tonnes. For extra manoeuvrability, kits can be supplied with 4 turntables. Economical and ideal for general workshop moving jobs, all types of machine tools, fabrication etc.
Dumpy Level The C330 automatic level is compact, solid, fast and very user friendly. For a start, setting up the levels can be done quickly and sighting is just as simple. Thanks to this solid, water and shock proof design, the C330 level is just as well suited for outdoor as for indoor use. Other types available e.g Laser Levels.
Air Hoist A full range of quality air hoists suitable for both industrial and marine environments. They are particularly suited to environments where there is a risk of explosion due to inflammable gases or where the duty is onerous.
Wilden Pump M8 Wilden's metal pump line lends itself to various processes and waste applications. Wilden also offers a multitude of elastomer options including Teflon PTFE, to meet your abrasion, temperature, and chemical compatibility concerns. Other models are available including ATEX versions.
Wilden Pump M15 Wilden's metal pump line lends itself to various processes and waste applications. Wilden also offers a multitude of elastomer options including Teflon PTFE, to meet your abrasion, temperature, and chemical compatibility concerns. Other models are available including ATEX versions.
Industrial Multimeter The new Fluke 87 has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.
3kva Transformer This is a robust step down transformer for use small power tools & lighting.
Step Up Transformers are also available please ask for details.
10kva Transformer This is a robust Heavy Duty step down transformer for use small power tools & lighting. 3 phase 415 – 110v and Step Up Transformers are also available please ask for details.
Spitznas Air Reciprocating Saw The Spitznas saw is a heavy duty air reciprocating saw for use in potentially hazardous atmospheres, used always in conjunction with a clamping device. With the clamp securely fitted to the work piece the saw will yield a clean straight cut and will reduce saw blade damage.
Air Cengar Saw PL 905 The PL 905 Cengar Saw is a powerful, compact air reciprocating saw designed for professionals in demanding environments where reliability, low weight, easy handling, low noise and vibration levels are important in protecting the operator and providing a high level of productivity. Cengar "Shatterproof" Bi-Metal blades are specially prepared for use with Cengar saws, to withstand the high operating speeds, and give maximum cutting life. These saws are most commonly used for cutting metal, timber and glass fibre reinforced plastic.
Air Cengar Saw CL 50/75 The CL 50 & CL75 Cengar Saw is a powerful air reciprocating saw designed for use in demanding environments where reliability, low weight, easy handling, low noise and vibration levels are important in protecting the operator and providing a high level of productivity. Cengar "Shatterproof" Bi-Metal blades are specially prepared for use with Cengar saws, to withstand the high operating speeds, and give maximum cutting life. These saws are most commonly used for cutting metal, timber and glass fibre reinforced plastic.
Makita 2414NB 110v Cut Off Saw This Tool is intended for cutting masonry and ferrous materials with the appropriate abrasive cut off wheel. Safety features include a guard over the wheel and trigger lock. The vice plate can also be set to cut angles of up to 45 deg.
Sabre Saw Bosch The Bosch GSA 900Eis a heavy duty variable speed reciprocating saw. This machine in intended for sawing wood, plastic, metal and building materials while resting firmly on the work piece. It is suitable for straight and curved cuts. When using the appropriate bimetal saw blades, it is possible to cut flush to the work piece surface. This machine also has an adjustable footplate and quick release button for changing the blade.
Jigsaw The machine is intended for making separating cuts and cut-outs in wood, plastic, metal, ceramic plates and rubber while resting firmly on the work piece. It is suitable for straight and curved cuts with mitre angles to 45°. The saw blade recommendations are to be observed.
Makita 6826 110v Screwdriver TEK This tool is intended for Screw driving in wood, metal and plastic. It has a depth adjustment cone fitted to the front, a variable speed trigger and insulated gripping surface for ease of use and safety.
Air Screwdriver TEK This tool is intended for Screw driving in wood, metal and plastic. It has a reversible trigger, externally adjustable clutch and insulated gripping surface for ease of use and safety.
Ultra Pipe Alignment Clamp 1 - 12" The UC three point precision alignment assures accurate fit-up of 1" through 12" pipe. The main body of this versatile alignment tool is double-walled steel plate. Its simple, lightweight design has quick action and is ideal for all field and shop fit-up use. The Ultra Clamp covers a wide range of pipe sizes that would normally take four separate tools.
Pipe Alignment and Reforming Clamp The Rim Clamps are available for various sizes of pipes or shells. The clamp will reform pipes or shells to schedule 80 with an out-of-round condition up to 2" (51mm). Exact positioning of the clamp on the pipe is not necessary, as the Jackscrews pivoting pads to handle uneven surfaces. Ideal for applications that require 100% weld and grind without releasing clamping pressure to prohibit cracking of partially completed welds. All surfaces of the Clamp that contact the pipe are made of stainless steel.
Ridgid 1224 Threader The Ridgid 1224 threader is an electric motor driven machine suitable for pipe, conduit and rods. It rotates while threading, cutting and reaming operations are performed. The on/off and forward/reverse switch allows the machine to rotate in left/right hand directions. It is operated by a foot pedal switch allowing increased operator safety. Using various die heads this unit can be capable of up to 4" npt/bspt.
Ridgid 1233 Threader The Ridgid 1233 threader is an electric motor driven machine suitable for pipe, conduit and rods. The head rotates while threading, cutting and reaming operations are performed. The on/off and forward/reverse switch allows the machine to rotate in left/right hand directions. It is operated by a foot pedal switch allowing increased operator safety. A 3" capability can be gained using 928 die head.
Torque Wrenches An extensive range of high quality torque wrenches to cover torque values from 1 Nm to 1500Nm, 1/4 to 1" drive. They are designed and manufactured to exceed international standards for accuracy.
Don’t see what you need? Send a general enquiry using the button below and we’ll take care of it.
