The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
Additional features, like the remote probe on these tools save both time and money when performing tests.
The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
Additional features, like the remote probe on these tools save both time and money when performing tests.
The 1555 and redesigned Fluke 1550C insulation resistance testers, offer digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switch gear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.
Offering CAT IV, the MIT1025 is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than its predecessor making it even easier to carry and store.
As well as measuring insulation resistance to 20 TΩ, the MIT1025 also offers various diagnostic tests such as Polarisation index, Dielectric Absorption Ratio, Step Voltage, Dielectric discharge and ramp testing.
Now equipped with lithium ion fast rechargeable batteries, the instrument has a large, clear, easy to read, display making it equally suitable for use in both bright sunlight and poorly lit environments. Information displayed includes resistance, voltage, leakage current, capacitance, battery status and time constant. In addition, the elapsed time of the test is displayed constantly removing the need for separate timer.
Electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit breakers can be performed with the CPC 100.
The patented test system replaces several individual testing devices and offers new, innovative testing methods.
The CPC 100 is the base for multiple accessories. These facilitate further applications, such as tan delta measurements, as well as line and ground impedance measurements.
RMO200G is a Micro Ohmmeter based on a state of the art technology, using the most advanced switch mode technique available today. RMO200G generates a true DC ripple-free current with automatically regulated test ramps. During a test the RMO200G ramps with increasing current before measuring and decreasing current after the measurement. This eliminates magnetic transients. After the test current has been set, the automatic test procedure is started by pressing the O-button.
The RMO200G instrument can store internally up to 500 measurements. All measurements are time and date stamped. Using the DV-Win software a test can be performed from a user’s PC, and the results can be obtained directly on the PC. Communication between the RMO200G and a PC is through an USB (as standard) or an RS232 cable (as an option). Using the DV-Win the result can be arranged as an Excel spreadsheet which can be later shown as a diagram and printed for a report.
The set is equipped with a thermal and an overcurrent protection. The RMO200G has a very high ability to cancel electrostatic and electromagnetic interference in HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing a proprietary hardware and software.
RMO600G is a Micro Ohmmeter based on a state of the art technology, using the most advanced switch mode technique available today. RMO600G generates a true DC ripple-free current with automatically regulated test ramps. During a test the RMO600G ramps with increasing current before measuring and decreasing current after the measurement. This eliminates magnetic transients. After the test current has been set, the automatic test procedure is started by pressing the O-button.
The RMO600G instrument can store internally up to 500 measurements. All measurements are time and date stamped. Using the DV-Win software a test can be performed from a user’s PC, and the results can be obtained directly on the PC. Communication between the RMO600G and a PC is through an USB (as standard) or an RS232 cable (as an option). Using the DV-Win the result can be arranged as an Excel spreadsheet which can be later shown as a diagram and printed for a report.
The set is equipped with a thermal and an overcurrent protection. The RMO600G has a very high ability to cancel electrostatic and electromagnetic interference in HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing a proprietary hardware and software.
Megger DLRO600 measures resistances between 0.1 µohms and 1 µohms, at high currents.
This versatile instrument can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage. A large liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed.
The unique design allows the weight and size of DLRO600 to be kept to a minimum; the instrument weighs less than 33 lbs (15kg). This small size makes DLRO600 equally at home in the workshop, on the production floor or in the field. The high current capability and compact design make DLRO600 suitable for testing circuit breaker contacts, switch contacts, busbar joints or other applications where high current is needed.
Electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit breakers can be performed with the CPC 100.
The patented test system replaces several individual testing devices and offers new, innovative testing methods.
The CPC 100 is the base for multiple accessories. These facilitate further applications, such as tan delta measurements, as well as line and ground impedance measurements.
The CT Analyzer automatically determines all relevant current transformer values and compares the results with the selected standard. The device evaluates the current transformer as per the IEC or IEEE standard within seconds with the push of a button.
It facilitates fast and economical on-site testing and calibration of metering and protection current transformers. Manufacturers of current transformers, high voltage transformers and switchgear also use the CT Analyzer for tests during development and production.
The CT SB2 switch box is available as an accessory to the CT Analyzer for automated testing of current transformers with multiple taps, without the need for complex and time-consuming rewiring.
The following values can be determined using the CT Analyzer:
In combination with CIBANO 500, the CB MC2 contact module increases convenience and safety during testing. It also expands the scope of testing by adding the dynamic contact resistance test, which detects wear-related problems with main and arcing contacts.
The innovative and clearly structured connection concept means that all tests can be carried out without the need for rewiring. The circuit breaker can be grounded on both sides to prevent dangerous voltages on the equipment.
One or more CB MC2 contact modules are directly attached to the interrupter units. This keeps the high-current cables as short as possible minimizing the test set-up time. Interference is considerably reduced thanks to the digital connection to CIBANO 500.
The CIBANO 500 circuit breaker test system combines a micro-ohmmeter, timing analyzer, and a coil and motor supply in a single device. This enables all important circuit breaker tests to be carried out even when a station battery is not available.
With the 3-in-1 system all types of circuit breakers (medium- and high-voltage circuit breakers with live and dead tank design) can be tested. It features a globally unique connection technology which considerably reduces the wiring effort and time required. In addition, OMICRON's Primary Test Manager Software (PTM) ensures convenient operation and delivers one clear, combined report for all the tests performed.
The innovative accessories can be used to extend the scope of testing as well as increase convenience and safety during testing.
The following 5 standard tests can be carried out on all circuit breakers using CIBANO 500:
The 750ADM mk2 and 750ADM-H mk2are compact, rugged primary current injection systems with a 750A output capability. The 750ADM has a maximum no load output voltage of 3.5V and the 750ADM-H has a maximum voltage of 5V. The units are ideally suited to all low power primary injection tasks requiring up to 750A for short periods.
Where higher currents and powers are required for primary injection, 7kVA and 20kVA primary injection systems are available. The PCU1-SP and PCU2/E systems have separate control and loading units, allowing a wide range of load conditions to be covered with different loading units.
The750ADM and 750ADM-Hhave two outputs, allowing injection of currents as low as a few hundred milliamps and up to 750A. Voltages up to 16V are available on the 40A output, allowing higher impedance trips to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. The metering has a capture time of less than 20ms, allowing the RMS of a single cycle to be accurately measured. Industry standard connectors are used on all inputs and outputs for convenience, reliability and safety.
The 750ADM and 750ADM-H are comprehensively protected by electronic overcurrent and thermal trips.
The timing system is very flexible without compromising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy. Two contact inputs are provided, each of which may be trigged by a volt-free contact or a dc voltage. The contact inputs auto-sense for normally open or normally closed contacts.
The 750ADM can be used to test many devices including:
VLF testing (viola)
EnerMech has recently been awarded a subcontract by JKC Australia LNG Pty Ltd for specialist commissioning activities on the Ichthys Project Onshore LNG Facilities in Darwin.
The multi-million dollar scope of work includes nitrogen/helium leak testing of the piping systems, cooling water system passivation and degreasing of the acid gas removal units.
Works will be conducted at Bladin Point near Darwin in the Northern Territory with engineering and project management coordinated by the EnerMech staff on site, with support from their Darwin and Perth facilities.
EnerMech's regional director for Australia, Allan Hart, said: "We have extensive experience on other LNG facilities in Australia and a high calibre of Darwin and Perth based staff, with strong credentials in nitrogen leak testing and chemical cleaning contracts, which put us in an excellent position to win this subcontract. We are looking forward to continuing our relationship with one of the most significant LNG projects in Australia."
Engineering services specialist EnerMech expect the scope of work to create more than 50 new jobs and has invested approximately A$ 2 million in new equipment related to this subcontract.
EnerMech employs a global workforce of 2,500 people with 670 based across Australia in Perth, Darwin, Melbourne, Sydney, Sale, Brisbane, Gladstone and Chinchilla. The business is a leading provider of integrated services including Cranes and Lifting, Electrical and Instrumentation, Equipment Rental, Hydraulic products and services, Industrial Services, Process, Pipeline and Umbilicals (PPU), Training and Valve supply and services.
Much like the support services we provide for assets at the beginning of the life cycle, we also deliver services as they near the end of their life. We understand that our clients’ want to maximise the economic value of their assets and to minimise any cost of decommissioning.
With significant support from our multi-disciplined crews and our single point contact, we provide cost effective and efficient maintenance solutions to support late life assets while still in production. Our experts also support our successful clients in their key decision making and deliver valuable services to prepare an asset for decommissioning.
Through lean thinking we can unlock the potential of any asset at a reduced cost, enhancing late life value and, when the time finally comes to decommission, we can support you with our broad range of services.
Delivering solutions to clients' problems is what lies at the heart of what we do. Our team of specialists are empowered to help our customers improve efficiencies and help maximise useful life of assets. We understand what you want from your asset at every stage of its life cycle and recognise that increasing efficiency and minimising cost is at the top of the list. We work with our clients to maximise the value they receive from maintenance spend whilst ensuring 100% focus on safety at all times.
Our services are offered as individual, one-off offerings through to fully integrated packages which are tailored to our client's needs. Through single point contact and multi-disciplined crews we have the capability to provide a reduced cost service which minimises downtime, increases operational performance and enhances asset integrity.
Our services include an extensive range of cranes and lifting, hydraulics, valves, electrical and instrumentation, pipeline and umbilical, industrial, process, training, inspection, integrity and equipment rental services.
Our experts provide integrated pre-commissioning services which ensure on-schedule, flawless start-up on new construction projects. We offer a truly integrated package of services which are supported by our team of specialists offering reduced time, cost and project risk, and greater efficiency.
Whether developing a greenfield site, expanding a refinery, building process modules in a construction yard or hooking up an offshore platform, we'll happily collaborate with our clients to save them money. The key to maximizing efficiency and achieving project objectives is the early integration of our experts into our clients' teams.
There are challenges in every industry and our skilled professionals work together with our clients to navigate the whole process from construction to production with single-point contract administration, minimized headcount, cross-utilization of specialty equipment, reduced mobilization cost, and optimized job schedules.
Our comprehensive suite of services ensures your systems are clean, dry, inert, and leak-free in accordance with industry design codes and project specifications.
