Venturi Air This Unit is a fibre glass light weight air ventilator, portable for localised fume removal and ventilation. This works by use of a venturi system of which compressed air is forced in through the air inlet, creating a vacuum effect in the chamber, air is then drawn in through the suction end and pushed out the exhaust end.
Welder Diesel Lincoln 305D The Vantage 305D is a diesel engine powered DC multi-process welding power source and AC power generator.
The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets.
The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance.
The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock.
These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.
Welder Diesel Lincoln 500 The Vantage 500 is a diesel engine powered DC multi-process welding power source and AC power generator. The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets. The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance.
The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock.
These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.
Invertor R4000 This machine is fully capable of MIG, TIG and MMA welding. The R4000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Invertor R5000 This machine is fully capable of MIG, TIG and MMA welding. The R5000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Invertor R7500 This machine is fully capable of MIG, TIG and MMA welding. The R7500 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Welder 3ph Invertor V350 Pro The Invertec V350-PRO is a 300 amp inverter that offers multi mode CV and CC DC welding. It can be used in conjunction with various add-ons such as wire feed units for Mig and Tig boxes.
Mig Wire Feed Unit Powered by either the R4000CV or R5000CV. This unit is microprocessor controlled and secured on a protective skid frame. It provides basic wire feed functions, latching and is available in a 2 or 4 roll drive.
Welder Lincoln Wire Feed LF37 The LF37–38 is a light and compact wire feed unit, which can be used in conjunction with either electrical welding unit or diesel up to 500A. Easy connection can be made to its power source using only an interconnection cable.
Tig Box Powered by either the R4000CC or R5000CC this dedicated TIG control unit provides gas pre and post purge control, high frequency striking, remote current control with digital readout, up and down slope and torch switch latching. Additional rear sockets are provided for MMA use. This is one of the most compact TIG control units available and can be used in excess of 100 metres from the power source.
Welder Tig Box Wizard This unit can be powered by electric or diesel welders, connected via standard welding cables thus having the option to work either in-house or on-site. Unit comes complete with torch, gas hose & regulator. Can be used for stick welding up to 6mm rods.
Plasma Cutter The Hypertherm Plasma system can be used for cutting and gouging various materials, with a maximum cut up to 25mm.
The unit can be powered from an external source which makes it ideal for working on-site. This unit can be fitted with a maximum torch length of 75ft (which is available on request)
Pug Burner The IMP is a portable power driven flame cutting machine. The unit can be used for vertical cuts, bevel cuts and plate edge preparation cuts. The maximum cutting edge thickness is 150mm.
Don’t see what you need? Send a general enquiry using the button below and we’ll take care of it.
