Make EnquiryRemove 

Generator Diesel 6kva
Diesel driven generator set with 1ph output. The unit can be used for most industrial applications where space is an issue, and supplied complete on trolley fixture. Unit can be fitted with spark arrestor and chalwyn valve for use in non hazardous areas.

Make EnquiryRemove 

Generator Diesel 20kva
Designed to function in all climatic conditions with an uninterrupted operation for up to 8 to 16 hours under full load. Ultra soundproof for operation where noise levels are an issue. Unit can be fitted with spark arrestor, chalwyn valve and can be skid mounted for offshore use.

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Compressor 130cfm
The Atlas Copco XAS67Dd Diesel Compressor is portable and has an output of 130 cfm, ideal for site work where compressed air is required but not available. Chalwyn valves and spark arrestors are fitted as standard to allow these units to be used safely in non -hazardous areas. Supplied standard on road tow running gear they can be skid mounted complete with lifting point and forklift pockets upon request.

Make EnquiryRemove 

Compressor 180cfm
The Atlas Copco XAS97Dd diesel compressor is portable and has an output of 180 cfm, ideal for site work where compressed air is required but not available. Chalwyn valves and spark arrestors are standard to these units, to allow them to be used safely in non -hazardous areas. Supplied standard on road tow running gear they can be skid mounted complete with lifting point and forklift pockets upon request.

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Pug Burner
The IMP is a portable power driven flame cutting machine. The unit can be used for vertical cuts, bevel cuts and plate edge preparation cuts. The maximum cutting edge thickness is 150mm.

Make EnquiryRemove 

Plasma Cutter
The Hypertherm Plasma system can be used for cutting and gouging various materials, with a maximum cut up to 25mm. The unit can be powered from an external source which makes it ideal for working on-site. This unit can be fitted with a maximum torch length of 75ft (which is available on request)

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Invertor R4000
This machine is fully capable of MIG, TIG and MMA welding. The R4000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.

Make EnquiryRemove 

Invertor R5000
This machine is fully capable of MIG, TIG and MMA welding. The R5000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.

Make EnquiryRemove 

Invertor R7500
This machine is fully capable of MIG, TIG and MMA welding. The R7500 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.

Make EnquiryRemove 

Welder 3ph Invertor V350 Pro
The Invertec V350-PRO is a 300 amp inverter that offers multi mode CV and CC DC welding. It can be used in conjunction with various add-ons such as wire feed units for Mig and Tig boxes.

Make EnquiryRemove 

Mig Wire Feed Unit
Powered by either the R4000CV or R5000CV. This unit is microprocessor controlled and secured on a protective skid frame. It provides basic wire feed functions, latching and is available in a 2 or 4 roll drive.

Make EnquiryRemove 

Welder Lincoln Wire Feed LF37
The LF37–38 is a light and compact wire feed unit, which can be used in conjunction with either electrical welding unit or diesel up to 500A. Easy connection can be made to its power source using only an interconnection cable.

Make EnquiryRemove 

Tig Box
Powered by either the R4000CC or R5000CC this dedicated TIG control unit provides gas pre and post purge control, high frequency striking, remote current control with digital readout, up and down slope and torch switch latching. Additional rear sockets are provided for MMA use. This is one of the most compact TIG control units available and can be used in excess of 100 metres from the power source.

Make EnquiryRemove 

Make EnquiryRemove 

Welder Tig Box Wizard
This unit can be powered by electric or diesel welders, connected via standard welding cables thus having the option to work either in-house or on-site. Unit comes complete with torch, gas hose & regulator. Can be used for stick welding up to 6mm rods.

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Welder Diesel Lincoln 305D
The Vantage 305D is a diesel engine powered DC multi-process welding power source and AC power generator. The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets. The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance. The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock. These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.

Make EnquiryRemove 

Welder Diesel Lincoln 500
The Vantage 500 is a diesel engine powered DC multi-process welding power source and AC power generator. The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets. The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance. The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock. These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Venturi Air
This Unit is a fibre glass light weight air ventilator, portable for localised fume removal and ventilation. This works by use of a venturi system of which compressed air is forced in through the air inlet, creating a vacuum effect in the chamber, air is then drawn in through the suction end and pushed out the exhaust end.

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Make EnquiryRemove 

Air Cengar JSZ
These Cengar Saws are hand held reciprocating saws designed to cut metal and plastics in production environments and can be used in Atex zoned areas where appropriate.

Make EnquiryRemove