Invertor R4000 This machine is fully capable of MIG, TIG and MMA welding. The R4000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Invertor R5000 This machine is fully capable of MIG, TIG and MMA welding. The R5000 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Invertor R7500 This machine is fully capable of MIG, TIG and MMA welding. The R7500 is part of a series of advanced inverter power sources are versatile, lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. With high efficiency and power, these units also save energy and costs.
Welder 3ph Invertor V350 Pro The Invertec V350-PRO is a 300 amp inverter that offers multi mode CV and CC DC welding. It can be used in conjunction with various add-ons such as wire feed units for Mig and Tig boxes.
Mig Wire Feed Unit Powered by either the R4000CV or R5000CV. This unit is microprocessor controlled and secured on a protective skid frame. It provides basic wire feed functions, latching and is available in a 2 or 4 roll drive.
Welder Lincoln Wire Feed LF37 The LF37–38 is a light and compact wire feed unit, which can be used in conjunction with either electrical welding unit or diesel up to 500A. Easy connection can be made to its power source using only an interconnection cable.
Tig Box Powered by either the R4000CC or R5000CC this dedicated TIG control unit provides gas pre and post purge control, high frequency striking, remote current control with digital readout, up and down slope and torch switch latching. Additional rear sockets are provided for MMA use. This is one of the most compact TIG control units available and can be used in excess of 100 metres from the power source.
Welder Tig Box Wizard This unit can be powered by electric or diesel welders, connected via standard welding cables thus having the option to work either in-house or on-site. Unit comes complete with torch, gas hose & regulator. Can be used for stick welding up to 6mm rods.
Welder Diesel Lincoln 305D The Vantage 305D is a diesel engine powered DC multi-process welding power source and AC power generator.
The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets.
The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance.
The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock.
These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.
Welder Diesel Lincoln 500 The Vantage 500 is a diesel engine powered DC multi-process welding power source and AC power generator. The engine drives a generator that supplies three phase power for DC welding circuit and three phase and single phase power for the AC auxiliary outlets. The DC welding control system uses state of the art Chopper Technology (CT) for superior welding performance.
The Vantage 500 is fitted with a selectable VRD (Voltage Reduction Device). The VRD operates in CC-Stick mode increasing operator safety when welding in environments with increased hazard of electric shock.
These can be fitted with chalwyn Valve, spark arrestor and be skid mounted for offshore use.
Venturi Air This Unit is a fibre glass light weight air ventilator, portable for localised fume removal and ventilation. This works by use of a venturi system of which compressed air is forced in through the air inlet, creating a vacuum effect in the chamber, air is then drawn in through the suction end and pushed out the exhaust end.
Air Cengar JSZ These Cengar Saws are hand held reciprocating saws designed to cut metal and plastics in production environments and can be used in Atex zoned areas where appropriate.
110V Extension Cable This Zone 1 Hazardous Area Extension cable pictured is a rated 110v 16 Amp extension fitted with Heat, Oil & Fire Resistant Cable (HOFR) c/w Ceag type plug and coupler. Enermech can supply additional zone 1 extension leads to suit platform and customer requirements.
Splitter Box 110v Zone 1 This Zone 1 hazardous area distribution box with 4 x 110v 16 amp splitter box fitted with Heat, Oil & Fire Resistant Cable (HOFR) c/w Ceag type plug and couplers. Other specifications of zone 1 distribution boxes are available to suit platform and customer requirements.
Transformer Zone 1 This Zone I hazardous area unit is designed to give 4 x 110v power outlets from a single source input. The unit comes supplied in a stainless steel frame with certified lifting points for easy manoeuvrability.
110v Chalmit Evo Junior Chalmit Evolution Junior Floodlight is a compact floodlight suitable for discharge and tungsten halogen lamps, certified for Zone 1 hazardous areas. This is a powerful floodlight which enables you to do your job safely, efficiently and with total peace of mind.
110v Hornet Kit Slam Hornet work lights use highly sophisticated technology to produce a work light that is compact, powerful and certified for use in Zone 1 hazardous areas. Light is produced by compact fluorescent lamps which give an impressive spread of light, which enables you to do your job safely, efficiently and with total peace of mind.
Ex Hornet Hand Lamp The Slam Ex Work light is a portable extremely reliable hand lamp for use in Zone 1 & 2 hazardous areas. This item is fitted with a replaceable anti static film giving the tube complete protection and allowing optimum light output to be maintained.
Slam Hornet Linkables These vessel entry lights have developed a formidable reputation as a highly reliable lighting system, even in the most extreme environments. This linkable version allows large areas to be lit with a chain of work-lights from just one power socket. The approved ATEX plugs and sockets allow extra units to be added as required even in a hazardous area.
Emergency Slam Hornet Linkables The SA Light Pack is a rechargeable worklight system for use in hazardous areas. Combining Slam and Powernet technologies, it is a highly versatile unit that will transform hazardous area working with its ease of use.
Heater 480v Ruffneck The Ruffneck FE1 heater is rated for use in Zone 1 hazardous areas. This unit is for indoor use only. Supplied in a stainless steel crash frame and with a square to round panel mounted on the front to allow the easy attachment of ducting to direct the heat if required.
Gas Detector Detective Plus Used singly or linked together, Detective Plus+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design and clear display make Detective+ the ideal choice for your transportable gas detection needs.
Gas Detector Tetra 3 Tetra 3 is an intuitive 4 gas personal monitor with a top mount display designed to withstand the harshest of industrial environments.
Gas Detector Triple Plus The Triple Plus family has set the standard for portable multigas monitors with their combination of ruggedness, reliability, easy of use and full flexibility of sensor combinations for flammable gases, oxygen and toxic gases.
Vacuum Pump 1200cfm The diesel driven vacuum unit complies with the latest European Directives and UK regulations for use in Zone II hazardous areas. The unit is containerised and built in accordance with DNV 2.7:1 standard and comprises of an enclosed protection frame with regular access to internal equipment via two doors at the front side. The unit
is comprehensively sound attenuated to keep noise values to acceptable levels at full operating speeds.
