Megger Meter The MIT310 Insulation and Continuity Tester has applications in all aspects of domestic, commercial and industrial electrical contracting, building maintenance, testing, inspection and servicing. Combining both Insulation testing and continuity testing, each instrument caters for all aspects of fixed wiring installations.
Carbon Steel and Stainless Steel Pipe Fitting Kits These fittings can be installed without hotwork. This allows fittings to be installed in areas where solvents and other chemicals may be present. These fittings offer "no heat effected zone" where a weld is susceptible to accelerated corrosion. In addition it will eliminate weld slag, incomplete fusion, weld suckback, the need for passivation and x-ray.
1/2" Air Impact Wrench - CP6500RSR The UT8126 is a adjustable torque 1/2" air impact wrench with a composite plastic motor housing which helps keep sound levels down and prevents the trigger handle getting as cold as aluminium cast models. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
3/4" Air Impact Wrench - CP8272 The UT8326 is a adjustable torque 3/4" air impact wrench with a composite plastic motor housing which helps keep sound levels down and prevents the trigger handle getting as cold as aluminium cast models. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
1" Air Impact Wrench - CP0611P The UT8425R is an adjustable torque 1" air impact wrench with a powerful air motor & side handle for operator comfort. This machine is designed for the tightening and loosening of threaded fasteners within the specified range by the manufacturer.
Hydraulic Toe Jacks These hydraulic toe jacks are ideal when working in very confined spaces and they also have an extremely low toe height. Typical uses include lifting and positioning of heavy machinery, fabricated steel structures and general engineering applications.
Hydraulic Pipe Bender Manual hydraulic benders for precision cold bending of pipes up to 2". Versatile, portable and ideal for onsite bending and industrial applications in general. Supplied with tip up wing for easy installation.
Hydraulic Cylinder Jacks c/w Pump, Gauge & Hose Enermech provides a wide range of cylinders and lifting systems. We have a solution for practically any application – lifting, pushing, pulling, bending or holding – in most industrial and commercial work environments.
Hydraulic Crimping Tool This tool is a self-contained hydraulic cable crimping tool suitable for non-insulated terminals from 10 to 400mm². This model is fitted with an automatic pressure release valve and is supplied complete with standard die sets and a carrying case. Models with 180° rotating head are designed for easy access into confined spaces.
Industrial Heater Industrial and commercial use infrared heater. This low sounding heater has possible connection to an optional room thermostat. Strong and long lasting construction. Easy maintenance with European standard components.
Makita Die Grinder The Makita GDO800C die grinder is a light weight heavy duty variable speed die grinder. The machine is intended for grinding non ferrous metals or de-burring castings with flap wheels or tungsten carbide burr's.
7" Air Angle Grinder The UT8754F grinder is a compact air angle grinder. This machine in intended for grinding all kinds of steel and dressing of welds.
Air Die Grinder The UT 5720A air die grinder is fitted standard with a cushion grip for operator comfort. The machine is intended for grinding non ferrous metals or de-burring castings with flap wheels or tungsten carbide burr's.
DeWalt DC925 18v Cordless Impact Drill The DeWalt DC925 18v cordless drill is variable speed with 3 gears, 21 torque settings and hammer action. Fitted with a keyless chuck, intended for use on wood, metal, masonry, and plastic. Supplied in a plastic case with 3 x batteries and 30 minute charger.
Magbroach MD28 Magbase Drill The Magbroach MD28 is a small capable magnetic base drill with a Broach cutting shank suitable for precision Broach cutting. The shank can be removed from the drill and fitted with a ½" chuck as required. Its compactness makes the drill ideal for restricted access.
Magbroach MD108 Magbase Drill The Magbroach MD108 is a powerful variable speed magnetic base drill with a Morse taper 3 output shaft suitable for precision drilling. This machine is fitted with a clutch built in to the motor that will help prevent jammed drill bits shattering during operation. MD108 works with MT3 drill bits being fitted directly into the output shaft held in by the taper. It can also be fitted with a 5/8" chuck adaptor or Broach cutting adaptor held in the same way as the MT3 drill bit.
Makita DP4011 Pistol Drill The Makita DP4011 is a variable speed pistol drill fitted with a keyless chuck, intended for drilling in wood, metal and plastic.
Angle Drill The industrial class drill whose head can be rotated to any angle allowing for use in the most tight of situations. With variable speed at up to 900RPM and a heavy duty keyed chuck.
MT2 Drill This Rotary Drill with cross & back handle and two speed settings, one of the most powerful rotary drills in the range, the big powerful motor gives a 23mm cutting diameter capacity through steel, this ideal for core drilling during steel fabrication, fitted with a two speed gearbox, auxiliary handle and safety clutch.
Rotabroach Drill The MD108 is a 4 speed, No.3 MT heavy duty drilling/milling machine with 32mm dia. drilling capacity and 100mm dia. broaching capacity using Magbroach cutters.
